Contact Information

3M
Building 225-3S-06
St Paul, MN 55144
1-866-513-4026
3M.com/RoofingAdhesives

Polyfoam Products, Inc. - Polyset Spec Writer

Welcome to the innovative Polyfoam online CSI spec writing tool. It's straightforward and easy to use. Simply select the options on the form below that accurately describe your project and then click the download button for the format you want. You will be prompted to save the file on your computer. It will be editable should you need to make any changes.

General:

Quality Assurance:

Mock-up may not remain as part of Work.
Accepted mock-up may remain as part of Work.

Products:

Components:






















  • Density conforming to ASTM D 1622M
  • Compressive strength conforming to ASTM D 1621
  • Tensile Strength conforming to ASTM D 1623
  • Water absorption conforming to ASTM D 2842
  • Moisture Vapor Transmission conforming to ASTM E 96
  • Dimensional Stability conforming to ASTM D 2126
  • Closed Cell Content conforming to ASTM D 2856
  • Surface Burning Characteristics conforming to ASTM E 84
  • Fire Tests of Roof Covering conforming to ASTM E 108, Class A
Conforms to:
  • Miami-Dade: NOA No. 01-0521.02
  • SBCCI Standard for Hurricane Resistant Residential Construction, SBCCI Evaluation Report 9822B
  • ICBO for One and Two Family Dwellings, ICBO ER-5595
  • Florida Building Code, Product Approval #FL830
  • Texas Department of Insurance Evaluation, Product Evaluation RC-22
Tile Installation: PolyPro AH160 Two-component Polyurethane Roof Tile Adhesive:
Slopes up to and including 6:12: Eave course may be fastened for alignment purposes only (not required)
Slopes above 6:12 and including 7:12: Fasten eave course and every third tile in every fifth course with one fastener
Slopes above 6:12 and including 7:12: Fasten eave course and every third tile in every fifth course with one fastener
Slopes Above 7:12:

Two piece barrel tile with slopes up to and including 6:12: Eave course may be fastened for alignment purposes only (not required)
Two piece barrel tile with slopes above 6:12 up to and including 7:12: Fasten pan tiles of the eave course and every pan tile in every fifth course with one fastener
Two piece barrel tile with slopes above 7:12: Fasten every cover and pan tile with one fastener
Two piece barrel tile with slopes above 7:12: The use of treated wood stringers under cover tile is acceptable

  • Density conforming to ASTM D 1622
  • Compressive strength conforming to ASTM D 1621
  • Tensile Strength conforming to ASTM D 1623
  • Water absorption conforming to ASTM D 2842
  • Moisture Vapor Transmission conforming to ASTM E 96
  • Dimensional Stability conforming to ASTM D 2126
  • Closed Cell Content conforming to ASTM D 2856
  • Surface Burning Characteristics conforming to ASTM E 84
  • Fire Tests of Roof Covering conforming to ASTM E 108, Class A
Conforms to:
  • Miami-Dade:Conforming to ASTM D 4586, Type II, non-asbestos, non-running type
  • Florida Building Code, Product Approval #FL4180
Tile Installation - Polyset ONE one-component Polyurethane Roof Tile Adhesive:
Slopes up to and including 6:12: Eave course may be fastened for alignment purposes only (not required)
Slopes Above 7:12:

Two piece barrel tile with slopes up to and including 6:12: Eave course may be fastened for alignment purposes only (not required)
Two piece barrel tile with slopes above 6:12 up to and including 7:12: Fasten pan tiles of the eave course and every pan tile in every fifth course with one fastener
Two piece barrel tile with slopes above 7:12: Fasten every cover and pan tile with one fastener
Two piece barrel tile with slopes above 7:12: The use of treated wood stringers under cover tile is acceptable

Two-component polyurethane foam with the following properties:
  • Density conforming to ASTM D 1622
  • Compressive strength conforming to ASTM D 1621
  • Tensile Strength conforming to ASTM D 1623
  • Water absorption conforming to ASTM D 2842
  • Moisture Vapor Transmission conforming to ASTM E 96
  • Dimensional Stability conforming to ASTM D 2126
  • Closed Cell Content conforming to ASTM D 2856
  • Surface Burning Characteristics conforming to ASTM E 84
  • Fire Tests of Roof Covering conforming to ASTM E 108, Class A
  • Conforms to: Florida Building Code - TAS 100 "Test Procedure for Wind and Wind Driven Resistance of Discontinuous Roof Systems".

  • Conforming to ASTM D 4586, Type II, non-asbestos, non-running type
  • Modified Bitumen mastic conforming to ASTM D 3019, Type II

Execution:

Installation:

General: Install in accordance with manufacturer's instructions and the following